UNLOCK YOUR EXCAVATOR EFFICIENCY
STEELWRIST PRODUCTS
Quick Couplers
Adaptors
Hydraulic Work Tools
Mechanical Work Tools
Quantum Controls
Front Pin Lock
Why We Choose Steelwrist Products
Steelwrist North America with corporate headquarters in Newington, Connecticut, offer superior products, outstanding customer service and reliable in-stock product availability. From their manufacturing with the best strength to weight attachment ratio and the lowest tiltrotator building height, to a vast selection of hydraulic quick couplers and work tools, and a member of the Open S community, we rely on Steelwrist everyday to unlock our excavator efficiency.
CUSTOMER ASSISTANCE
Corporate Offices:
522 S Hoop Pole Rd
Guilford, CT 06437 USA
Tiltrotators
MODEL Series: X02 – X32
Carrier Weight: 2 to 33 tons
If you don’t have the ability to rotate your attachments 360 degrees put the Steelwrist Tiltrotator at the top of your list. All components are steel casted with the lowest building height on the market for optimized digging and exceptional fuel efficiency. SW boasts the highest tilt angle at 45 degrees;, Front Pin Lock technology for increased safety, Datatag theft protection and extended warranty. Plus, an integrated four finger gripper cassette (unbeatable) and central lube for long wear.
Quick Couplers
Carrier Weight: 2 to 33 tons
Steelwrist’s steel casted quick couplers are symmetrical and compact offering Front Pink Lock or Front Pin Hook safety technology for your crew. Steelwrist is the only manufacturer in the world to have their symmetrical couplers completely cast in steel resulting in a superior strength to weight ratio. Add the fully automatic quick coupler with the SQ series allowing you to change between hydraulic powered attachments, as well as mechanical work tools, in seconds.
Adaptors
MODEL Series: S30 – SQ90
Carrier Weight: 2 to 33 tons
Weld on S-adaptors can easily convert any work tool to a Symmetrical standard, unifying your attachment fleet to a wider range of interchangeable tools. Weld on SQ-adaptors make it super easy to swap hydraulic tools in seconds by connecting to a central lubrication systems. The male couplings in the adaptor come with Qplus technology for higher flow and better serviceability. Ask about SQ adaptor plates that convert any hydraulically powered tools to the SQ system.
Grapples
MODEL Series: FG, MG, SG
Carrier Weight: 6 to 26 tons
Choose from the Steelwrist’s high-performance Multi, Finger, Stone and sorting grapples. Covering a multitude of tasks, the grapples work great with SQ-technology. The Finger grapple has a high clamping force, Hardox 500 wear plates and comes in 7 and 5 finger versions. Heavy lifting, loading timber and waste, the Multi grapple is perfect for general construction with expander pins, self lubricating bearings and mechanical end stops. For medium duty stone, recycling, scrap and demo work, the Sorting grapple has a super wide opening and tip to tip closing edges.
Compactors
Carrier Weight: 2 to 30 tons
The multi uses of compactors are made easy with Steelwrist powered work tools. Quiet operation for compaction of pipeline trenches, embankments, soil and more, with low height and off-center bracket positioning for better reach. Angled housing design and rubber buffers provide optimal force distribution. Built with pressure and flow rate control for overload protection, with an open design allowing for the plate to self-clean and prevent backfill material from jamming the compactor.
Pallet Forks
Carrier Weight: 7 to 33 tons
Steelwrist Pallet Forks, both mechanical and hydraulic, when mounted under a tiltrotator make the ease and versatility of this tool a tremendous advantage. Fork tines are adjustable, with the hydraulic tool using a controller inside the cab. Sizes from S40 (4,400 lb lifting capacity) to SQ80 (11,000 lb lifting capacity).
Asphalt Cutters
Carrier Weight: 2 to 33 tons
High-strength structural steel with highly wear-resistant steel make Steelwrist work tools durable and robust. The Asphalt Cutters are perfect for cable and pipe installs and precision cutting on asphalt as well as lawns.
Grading Beams
MODEL Series: GR
Carrier Weight: 2 to 33 tons
Grading beams are indispensable for finish work offering leveling and compaction of material over large areas. Steelwrist grading beams are available for sizes from S40 (49″ width) through S70 (118″ width).
Rippers
MODEL Series: RP
Carrier Weight: 2 to 33 tons
For demolition and mining, Steelwrist’s Ripper design allows for optimal breakout force and suited for stumps, stones and frozen ground. Sizes ranging from the X02 Tilt (RP30) up to the X32 (RP70).
Buckets
Carrier Weight: 2 to 33 tons
Steelwrist’s strength to weight ratio makes these mechanical bucket attachments an excellent choice. For excavators from 2 to 33 tons, the varying designs are engineered with ideal maneuverability and loading in mind. Choose from Cable, Digging (with and without teeth), Grading, V-Ditch and Utility in a wide variety of sizes.
Sorting Buckets
Carrier Weight: 2 to 33 tons
Reinforced with Hardox500 and 500 Brinell steel bars, Steelwrist’s Sorting bucket can be used with or without a tiltrotator. This attachment is a must-have on any job site to clean up and sort materials.
Brushes & Sweepers
Carrier Weight: 2 to 33 tons
There is a myriad of uses for Steelwrist’s Fixed Brush Sweeper. With a pallet fork bracket as standard, excellent to remove gravel, snow and waste. Looking for a more robust clean up attachment? The Steelwrist sweeper offers dual direct drive hydraulic motors with integrated parking stand and mudflap. Clean pavements, railway tracks, flooding or other disaster areas from debris or snow.
View or download the complete Steelwrist Products brochure!
Contact A&D Equipment for your specific attachment sizing, product availability and pricing for any Steelwrist product.
A&D Equipment, Inc. is an authorized dealer for Steelwrist North America products and strives to offer our website visitors the best possible information. Product specifications and availability may be altered, updated or redacted without notice.